How To Zero Your Optic At Home

Your captioning literally says “use this to zero it incorrectly” lol

Can you use this on 3 inch barrel?

Do you still have to zero the laser in order to zero your optic?

I have a green dot sight. Probably shouldn't have done that

Is this any different than the $10 bore Lazer online?

Do u do anything other than push products

Excellent tutorial. Great use of a short & the K.I.S.S. principle.

Yep thats how i do my firearms 😊

and once you've bought this device and used it.. you just have to go to the range and make sure you're zero'd ..that's funny to me that it ended the video that way

what makes this any better then a regular bullet bore sighter?

I prefer the lasers that look like bullets and you put one in mag and wrack slide. then laser comes right out or barrel where a bullet would sit.. While they are only like $20 on amazon, I feel like if it was not straight, the lazer would hit side of inside barrel and never make it out to use to sight. Not sure i trust a big stick dangling off the front of barrel lol

No not just like that you zeroed in your optic abort site does not zero your optic! Moron

You don’t need a bore sight to zero an optic in correctly 😂

Zero at 10 yards you will be spot on from 10 to 15 yards 20 and 25 you will be a little high..

Do these work with a suppressor?

Tactical elite is great the boresight 2.0 is very accurate and the customer service is great had minor issues and they sent me out a brand new one!!!

How is it aligned? It’s not centered in the red dot…

Do you place your red dot above the green lazer? It looks like that on the video. I’m new to shooting and your videos have been really helpful

Love tools, but i still think if you dont know how to zero, you should zero it without the laser. Takes the fun out of learning how to and helps you keep focus by firing one shot then decide to up or lower, left or right, then shoot again to the previous shot, after a while then yeah for a quick near zero, use the laser.

It still wasn't aligned when you were done. Still needed to come over

1. No bore sighter is going to get you 100% zero, it’ll only get you on paper, target or close enough to your point of impact.

2. After using your bore sighter at home or at the range, I highly recommend you to be at actual range with live fire to correct and confirm your zero.

3. Well, 3# should’ve been first but make sure that you know your purpose and your yards before anything. You don’t want to be the guy that has a zero for 100 yards but has a purpose of 10 yards lol.

4. Understand your height over bore with a red dot.

5. Me personally, anything from 0-7 to probably 10 yards is mostly a point and shoot for me. At that point, I’m not really looking for a key hole or bullseye shot. I just want be in that accurate zone or at least 1-2in group shot to be accurate.

6. This is a great product to help you to sight in your red dot to your pistol or rifle easier.

7. Know your firearm safety before using this product or any other product.

My friend has one of these and it's awful and doesn't zero anything. I have a $10 bore sight that goes inside the barrel like a bullet that works like a charm.

If you aim at another point less than 15 yards, for example, even though you have already zeroed it there, the red dot does not line up with the laser. Why does this happen?

The issue I have is figuring out which piece to use. I bought that very kit but then saw dozens on Amazaon that are cheaper and have the attachments are organized and labeled. Just saying for the price, they should have not just thrown them in the bag. I also reached out to their customer service and they never replied, so folks, do what makes you happy, but a bad customer service experience is a no go for me. I can still trial and error it, but I shouldn't have to.

Does it fit 5.7

This is harder than it looks. If you have a vice grip to keep the firearm in the same position, it's much easier. I don't have one though.

Rifle perfect, pistol not soo much

kid: "dad im hungry"

jq: good question

Not bad but this is $50 and you can get the literal same thing in the same box from Amazon for $25. Dont pay the influencer tax

Can you use it on a bb gun

Does not work for Hell Cat Pro. But good product though.

So you don’t have to screw it it just pushes in the barrel

Bro. Just searched this on Amazon but the laser is red. The dot is also red which will make this impossible to use…

To zero incorrectly?

Yeah this thing was the worst thing I’ve ever purchased. Thing took me OFF target entirely. Thank god for absolute co witness and the lollipop method. I’ll be damned if this thing even touches my rifles

This is a horrible product. It never aligns right at all. I’ve tried with multiple handguns and multiple optics.

What size adapter is used for 9mm

Sorry man I have to ( NOT INTERESTED) your channel. I like some of your content but tired of seeing you take some random comment say it’s a question and then proceed with some shameless sponsorship plug. Ahhh your fired!

As some have already mentioned in the comments already, do not just use a laser bore sight to zero without first confirming that zero at the range. I used a laser bore sight to zero my optic to 15 yards in my backyard (45 ft, measured), made the adjustments, then went to the range and shot with that zero to make sure it was accurate. In my case, my at home zero was spot on, then again I used 2 separate long bore sights and then a cartridge bore sight to make sure, cause even with 3 different lasers, inherently they will all have micro differences in their zero’s. Long story short, you could just do this with one at home, then shoot it at the range to confirm zero, or you can be like me and use several of the same brands bore sight to make sure you get the best average of a possible zero like a maniac 😂 granted it paid off, it made shooting so god damn easy, not to mention, if you have a flashlight & Laser combo light in red or green, get a boresight of the opposite color, and you’ll know your weapon mounted laser is zeroed to your distance when the red/green reticle and red/green laser make a yellow light. I’m talking about absolute zero baby. Last thing, make sure you have suppressor height sights so that if your optic goes down, you can still use irons. Tips I learned along the way.

Thing sucks. I bought and no matter what weapon I put it in, it is never accurate. Could be user error but i doubt it. Again in the realm of possibilities though

It could be 25 yard zero

So everytime you shoot less ot more than 15 meters u have to adjust your sight?

Should the laser and dot be exactly aligned? It looks like one was higher than the other

I need smth like this for asg

What’s the best bore sight for 9mm