The JAKL – Rear Adapter Installation

a hudred for this adapter is a bit high no? i thought it would be more like 60.. since you still have to buy the pricey upper

would the Jakl upper work with the BRN180 lower receiver?

Can you use the scar buttstock on a milspec lower?

Brother, relax a little. You look like this is a hostage situation.

I really wish my JAKL had come with this adaptor and a stock other than the F5. Since it didn't I'm now spending at additional $500 on this adaptor and a stock that retains the overall shape of the F5 but is actually made well, the B&T stock from Haga.

It would also be cool if you guys could get your warehouse in order. I ordered both the Haga sock and PSA 1913 adaptor at the same time. The Haga stock is set to arrive tomorrow. Your adaptor hasn't even shipped yet. It's not 2010 anymore, items taking a week or more to arrive is no longer acceptable.

Might be a silly question, but would I be able to put a Jakl upper on a standard AR lower that has a buffer tube and does NOT have that threaded adaptor in place? From what I see on the structure of a Jakl, I assume that the bolt carrier won't fly into the buffer tube when operating even if without the blocking, but I can be wrong. The answer can affect my decision on which lower and configuration I should go with. Thx

Has the adapter assembly been out of stock for awhile or what?

Should be like 40 bucks max

So… whats up with the side wings on that adapter anyway? Would be nice if they were not there.

Do these components come with the jakl build it?

Now sell the lower to NJ. What’s wrong with shipping a complete lower to us? I thought psa motto was to arm as many civilians as possible ?

Will the picatinny adapter work on a PA-10 lower? I'm starting a lower build to be ready when the .308 JAKL uppers start shipping. I feel like it should fit…

Use rocksett not locktite on any firearm. The heat will break it down overtime. PSA You should be using Rocksett for and threaded components that need to be locked down without a pinned lockset

What about the safety detent spring???

Congrats on your superbowl win

So the rear adapter simply snaps in place?

So this can be used on any milspec ar15 lower?

Tbh I don’t see why loctite is necessary on the buffer adapter. Those ears would prevent it from backing out. If anything, I’d loctite the small Allen head screw.

Is the adapter needed or can it run with the buffer tube still on?

Im looking forward for this one problem. With the PSA JAKL RIFLE LOWER BUILD KIT MOE SL EPT F5 STOCK, FDE come with that BUFFER WITH BRACE/STOCK ADAPTER ASSEMBLY?

Does the upper work with BRN180 lower?

These should already come with the uppers, not cost an extra $100.

How do I properly install the f5 stock when purchased separately? I installed it (I thought right) but I am unfortunately having ejection and reload issues that I think is a gas issue but not fixable with the adjustable gas block. Worked perfectly with my J customs skeleton stock. Please help 😢😢

i love my 14.5 Jakl! its accurate and shoots smooth for a long stroke piston gun. keep up the good work PSA

Can you provide a disassembly video in order to remove the picatinny and attach the F5 ACR style stock?

does anyone know if this adapter works with the MCX Upper?

My problem is getting out the factory installed plug! So much loctite 😑 might need heat to break free

Law tactical solves the 300 blk out issue make a adapter for bca right side charging uppers

Now will a standard ACR stock fit that adapter?

I've done everything right and I still have a little wiggle in it. Does this need to meet any torque specs?

Can the jakl go on any ambi lowers like an LMT MARS, Forward Controls LRF, etc?

So my question is, do this and lose an entire lower that's now dedicated, and send PSA $700,
OR skip all this hassle and pay 2x for a CMMG Dissent that mounts instantly on any lower with no proprietary parts, alterations, or custom work.
Easy choice as these proprietary parts are always sold out.

Thumbs down because y'all put so much blue loctite on mine I can't add a stock because you can't get it off.

Can’t believe I’m just finding out about these literally just built a 762 5inch if I would have know I would have got a 300 blackout jakl

So i only need this and the jakl bolt catch to make the upper work with an AR lower?

Can the PSA Jakl upper fit on a BRN180 lower?

When the 13.7” comin?

What is the Jakl back plate made of? Aluminum or steel?

13.7 pin and weld with warcomp

It would be so cool if they made jakl in 8.6 blackout

Can we run a buffer tube with brace/stock on it instead of that plug and pic rail?

With the rear buffer adapter and Jakl bolt catch, will the Jakl upper work on a Radian or LWRC full ambi lower?

You guys should have utilized the buffer detent to prevent the adapter from walking out

That was easy.

Thus it need to be torque to spec or hand tight and blue loctite?

I love the Citadel ring! getting mine this Friday. Go Dogs!

Do you know if the FAB podium bipod will fit on the Jakl?

Will there be a carbine version made?