There are just too many other options than to block off your ability to repair your trigger assembly in the field if you get a popped primer. This happens once or twice a year at the tactical matches I shoot, and if you have this part on your gun, it’s way too difficult to mess with off the back of a truck or on a picnic table to get the gun back in working order.
Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
Run the Geissele Maritime Bolt Catch on all my ARs, never had this problem…
Wow your dumb.
grind it fool!
This is the most Karen complaint iāve ever seen on an AR part. Punch the pin the other way, genius.
Iām not skilled enough to remove my trigger in the field. Oh wellā¦
Thanks for this video. It just saved me from a bad purchase.
Youāre not using the right precision tools I donāt know who the fuck is going to try and fix the trigger during a gun fight but even then if I had the right punch kit and slave pin as the triggers come with Iāve had zero issues and Iāve put multiple G triggers and the Maritime boat hatch on so I installed a trigger with that bolt catch there and it can be a little bit in the way but not much and it depends I mean youāre using a fucking arrow receiver dude if you would have an issue with it maybe get forward controls Arabian but someone that predominantly shoots left-handed it is great because I do not like all that bullshit Bad Lever crap thatās too much going on I like slick clean at sure depends on the set up but I always if Iām not using an ambulance to work that bolt catch I would knock the regular ping-pong paddle out of a nighttime amend and put that in as a secondary yes shooting red-handed opposed to left or just locking the bolt back makes it much easier so it basically is an amp bolt for the lease thatās extremely minimalistic so use something else if itās not for you then donāt use it doesnāt mean you get to advertise that youāre one person that doesnāt like it and itās not like theyāre amazingly expensive theyāre about 20 bucks And her machine much better than our fucking bad whoever which is a good name is not a good liver is a bad lever because a piece of shit so maritime will catch or other ones like phone controls shit like that I donāt know what youāre aiming for with the bolt releases/bolt catch but Iām able to easily knock in a trigger or knock out trigger without having to knock out The Maritime basically you probably donāt have the right punch set shit you can get a nice precision one where you can use it for painting your gas block or completing an entire upper and lower for 30 bucks
Punch it the other way?
Tiny brain complaint lmao
Did you try pushing it out the other direction? Or maybe just remove a small amount of the bolt catch so the pin will clear. I would just punch it out the other side though. Easy peazy!
Dumbest complaint ever.
This is the guy that pees in the sink because someone left the toilet lid down.
*Has* to be a joke. š
A dremmel will take care of that in 2 seconds
just hack it off if it bothers you that much
Punch the pin out from the other side maybe? I hate gun laws but videos like this make a valid case for the liberals
What?
Lil grindy grind on er… no big deal š gotta customize shit sometimes
No big deal. Just grind a little off the bolt catch in that area. No different than dudes hacking off the carry handle prior to the creation of the mk18
so use a smaller pin punch?
You FUCKING IDIOT. Tap it out the other way… Fuck.
You can punch the pins out the other side. Its weird to complain about "gucci" parts on a low end lower receiver. There is no reason to worry about trigger pins with the maritime bolt catch, just push the pins out the other side, if the pins are walking out then install anti-walk trigger pins. Might as well since you are putting high end parts in a low end receiver.
Pop it out the other way
Took mine to a local welders shop and they plasma cut an eighth of an inch off that small spot. Works like a charm
Literally push it thru from the other side š¤£
i have never once had to take my trigger apart in the field lmao
Lol and why is that a big deal??
This video is a pretty good indication why he has less than 900 subs.
Push the other way.. grind a little…
Dude push it the other way! Lol
Could take a dremel to it and take some material off. I thought it was gonna be something else, more serious.
What a nimrod
The real problem with the Maritime bolt catch is that it doesnāt fit in many billet lowers. The roll pin holes will not align enough for the roll pin to install properly.
The biggest fail is the price.
Whatās the update??
I feel like logic or something could afford you to do it the other way, or the fact I donāt think you should be doing trigger repair āin the fieldā I feel like at that point you transition to a sidearm or find a buddy mid āāāoperationāāā if we are gonna larp about it, that has a spare rifle like in vehicle borne operations
For a āfirearms guyā this video really makes you look kinda silly š¤·š¾āāļø
Have you tried pushing the pin out from the other side? I seriously thought I was going to look at the upload date and it was going to be April 1st.
Cut the bit thatās blocking off
Don't remove your trigger in the field dumm idea no reason for it