You can purchase these rod guides here
Here’s some quick reasons why I use a bore guide for cleaning, what I want them to look like and what they’re made out of.
DISCLAIMER: This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading #boreguide
Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
So… NOT a complete guide to picking the best bore guide.
Just a product endorsement for one specific bore guide. SMH
3:15 makes sense sense on a centerfire, the casing diameter is far greater than the bullet diameter. But how is that seal made on a .22 rimfire where both the case and bullet diameters are the same.
I have wondered john why don't some of these custom makers of bore guides like pma Lucas etc, why don't actually make the guide to have the neck also and sit all the way to the front of the neck
Is that a bergara on the vice?
Nothing for a .308 Winchester.
Are bore guides really necessary???
Thanks for sharing Brother💯😎👍🏼
Great information
That was very educational John. I'm looking to buy a couple as we speak. Best wishes.
Would one of these guys' guides work for a Lee Enfield?
Good explanation John. Informative
What model bore guide is that and do you think it will work with a Terminus Apollo action in 6.5 creedmmor?
I was in the military for over twenty-one years. I put thousands of rounds thru weapons and cleaned them all without a "bore guide." They all survived for many years. I am not sure this is a big deal.
That was actually a very good video short and very informative 👍
Hi John what is your opinion on Bore tech cleaning tools and solvents. I’m seriously considering dropping 260 bucks not including shipping. On rods brushes,jags,and the solvents for my pistols and rifles.
How do you chuck up the delrin guide in a drill? Just tape the tapered chamber end and clamp the cordless drill chuck around it?
Great video as always
With the barrel separate from the action as you showed can’t you just clean the barrel separately?
Thumbs up. Thanks for the information
Any tips/tricks for replacing those pesky O-rings when they give up the ghost? 😉
THANK YOU!
Thank you simple but easy!
Is this the ultimate bore guide ? It looks like it might just well be . I hope they ship 🚢 them overseas so I can get me one . I’m off to Creedmore Sports Website to have a look see 😀. Thanks F-Class John 👍
Hi John, happy new year ! You should find a lathe and learn machining, you don't figure how it can be usefull for accuracy reloading. Are you satisfied with your Deviant receiver ? In France it costs 2500€ without trigger lol, I dream of it but it's way too expensive for me.
For people who wanna get some info about making a boreguide :
Good video, I use a super cheapie but you have to hold it in with one hand and do some sort of advanced yoga move to clean the barrel. I used the bore cam you talked about earlier and got a view of my chamber and had to go buy some chamber brushes to fix that all up. I looked on Amazon for the bore guide and don't have a .308, so looks like rubber bands and yoga it will be.
reminds me of the Lucas bore guide…bummed he doesn't make them any longer
I have some delrin bore guides for the AR15 and the AR10, not sure what my 700 bore guide is made of but it is one of those with the screw in locking bar (which always seems to work loose). I need to upgrade my 700 bore guide.
I use Mike Lucas bore guides. A bit pricey but they work well
Great Vid John… I use a small trash bag, it will slip under the guide next to the action, works great
Good video. I use the universal one and don't really care for it but haven't really wanted to take the time to sort thru what else to get. Thanks for the help.
Thanks for sharing I just got one of the Tipton system a few months ago. And the carbon cleaning rod.
Good video, never thought much about them when I was using the universal type but I've since changed to to 21st century and huge difference how they protect in several ways while cleaning
When is the website going to open? It still says it’s closed.
Nice bore guide. 284 or saum chamber?
Nicely done young man.
Looks like a possum hollow guide