Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
I saw a commentator on another channel asking how he was planning on using the magnifier with it aimed at the center of the EoTech I get not knowing every product out there but this guy was ripping the poster apart so I didn’t feel too bad about pointing out the obvious flaw in this “custom build guys” argument Needless to say no reply to that one
Don’t over think it fellas. The eye relief is not that bad, use it as it is supposed to be used and you’ll be fine. Or buy an Acog. Get trained on that eye relief and then you won’t complain about a magnifier 🎉
Or get a monstrum tactical blackbird 1.5x prism scope: a bit of magnification without it being too obnoxius, an etched reticle for non powered use, and its under $100
Move the magnifier back. It doesn't need to be right up against the red dot. Sure, the eye relief sucks but bringing it back to your eye and running a wider charging handle like a raptor or a BAD handle works very nicely.
ppl say they use the high mounts because they shoot with nods. how often are you shooting with nods? i would put money on it not being more often than ur shooting without them. it feels nice to crank ur neck at 90 degrees when you lay down behind it. those flip to center mounts get in the way of tubes and taking it off to put in a pouch or in a pocket is stupid too.
too many ppl getting into the consumerism of social media buying sht they dont need cus their favorite gun tuber said it rocks.
I love my LPVO on my 16 inch. But my 13.9 has an Eotech exps3-0 w a G33 and it’s heavier than my PWS 16 inch with literally the same attach. Light sling and foregrip.
When I first saw these guys and what they were talking about, I kinda looked at it sideways, and then I saw it was spiritus systems and I remembered that they hire skater queers to sell you stuff that you could either make or buy cheaper almost anywhere else or completely don’t need it all
Started with a 1x prism, then went to 1-4 lpvo, then red dot, then with magnifier, going back to a 1-6 ffp lpvo. I really liked the prism and red dot for weight but magnifier made it into 1-4 lpvo weight with underwhelming results so figured if I have that weight might as well go ffp 1-6
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Great points!
If you're mounting or unmounting a magnifier, do you need to zero it in? The aim is still coming from the red dot, which is unchanged
Im curious why eotech magnifier and an aimpoint rds?… why not just run aimpoint x3 and rds?
I saw a commentator on another channel asking how he was planning on using the magnifier with it aimed at the center of the EoTech
I get not knowing every product out there but this guy was ripping the poster apart so I didn’t feel too bad about pointing out the obvious flaw in this “custom build guys” argument
Needless to say no reply to that one
Really could care less what people are running on their sh!t. I run what works for me. Sick of all these videos from people that don't know sh!t
Don’t over think it fellas. The eye relief is not that bad, use it as it is supposed to be used and you’ll be fine. Or buy an Acog. Get trained on that eye relief and then you won’t complain about a magnifier 🎉
The Unity mount is $265? 😂 these companies are getting ridiculous with their pricing.
Or get a monstrum tactical blackbird 1.5x prism scope: a bit of magnification without it being too obnoxius, an etched reticle for non powered use, and its under $100
Too much weight, and how often are you shooting with NVGs? Overpriced for the mount and optics.
Heute morgen nach dem aufstehen hab ich auch erstmal n Ei relieft
Unity is high quality. But they out price themselves. They would grow and be more successful with their sales if they came down more.
That’s a fake EOTECH 😂 The real brands logo is in all caps. This knockoff says EOtech smh.
Move the magnifier back. It doesn't need to be right up against the red dot. Sure, the eye relief sucks but bringing it back to your eye and running a wider charging handle like a raptor or a BAD handle works very nicely.
Why does the guy on the left remind me of the Steve Forsing from Sicario?
Srsly X, how the hell your aim still cracked after all theses year's?
ppl say they use the high mounts because they shoot with nods. how often are you shooting with nods? i would put money on it not being more often than ur shooting without them. it feels nice to crank ur neck at 90 degrees when you lay down behind it. those flip to center mounts get in the way of tubes and taking it off to put in a pouch or in a pocket is stupid too.
too many ppl getting into the consumerism of social media buying sht they dont need cus their favorite gun tuber said it rocks.
Idk if you know what scalability means
I love my LPVO on my 16 inch. But my 13.9 has an Eotech exps3-0 w a G33 and it’s heavier than my PWS 16 inch with literally the same attach. Light sling and foregrip.
Yep!!! $1,000 mount and magnifier haha 😂👎🤮
Why not just use an lvpo
the mounts are getting absurd
When I first saw these guys and what they were talking about, I kinda looked at it sideways, and then I saw it was spiritus systems and I remembered that they hire skater queers to sell you stuff that you could either make or buy cheaper almost anywhere else or completely don’t need it all
That riser needs about another 4 inches
Why all the riser mounts??? I can’t see a use behind it
Nothing wrong with the ACOG
Started with a 1x prism, then went to 1-4 lpvo, then red dot, then with magnifier, going back to a 1-6 ffp lpvo. I really liked the prism and red dot for weight but magnifier made it into 1-4 lpvo weight with underwhelming results so figured if I have that weight might as well go ffp 1-6
That looks like a holosun 515.. but you can call it what you want i guess.
Height over bore maxxxing
Magnifiers are keymod in a world of mlok
All magnification has eye relief.
Just run a ACOG at that point, this is silly.
The riser is becoming a new trend eh?
T2 and magnifier gang represent