If you own a WOT trigger, you probably have no issues running .223/5.56 but if you’ve tried to use it with 9mm, you’re probably running into problems. At least in my situation, I found the reason why the WOT wasn’t running with my CMMG 4.5″ dedicated 9mm upper. I hope you find this video helpful in your quest to push the envelope of what is possible with the WOT.
Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
Solid fix, I've found velocity triggers makes a steel shim for the bottom of the lower, Im going to give that a try
Stick black electric tape into the bottom of the trigger and it will work also
I ended up with the same idea after your previous videos, used a shim to fix slop in my glock trigger
GREAT INFO ; "BRO."…. (ALSO ; GOOD TO SEE THAT YOUR BACK UP AND RUNNING YOUR VIDEOS ONCE AGAIN….😉👍)
Your method keeps from it rocking forward where the grip screw method doesn’t. I’ll try your way when I get time
Great video!
Use grip screw with tapped center trigger screw will fix wobble on some and just using better pins works on others