Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
I have an Anderson stripped lower just bought a complete upper now need to finish. what do u suggest I buy for the lower build kit I'm a newbie and this is my first if u can point me in right direction to complete this is appreciate it. thanks
I just built a 10.5" ar pistol and I'm not sure how far up to mount my surefire g2x. I was afraid the gases coming out of the flash hider would damage the light. Have you had an issue with that?
Try the MOE-K or the MOE-K SL grip. Same angle, less girth for better reach. K has no beaver tail, k sl does have a beaver tail. I use the Moe k sl on all of mine.
I saw most of your video. I didnt see mention of the optic. Is it a laser, or a red dot scope? Im building a pistol right now, and I am hoping to put on a laser myself, and ws wondering what you thought of the laser….if that is what you have on there. Thanks
If you take the forearm tan grip off you don't have to classify it as an SBR. It will be a legal build AR pistol. I talked to our local ATF agent and told him what I was building which is a 10.5 inch barrel ar with the pistol buffer tube and a Sig Sauer arm brace and he told me as long as I didn't shoulder it or place a fore grip on it to have fun with it as a legal pistol that no stamp was needed. It now has a 7 1/2 barrel on it to make it shorter and a little lighter.
beautiful Pre-sbr im running 11.5 pistol with shochwave blade and with my Ms2 sling it rest perfect on my cheek and akso transition very well but if i ever get to where i could i will sbr one but this one is staying the way it is again you have a very nice AR sir!
DUDE you NEED to.get you a shockwave blade for that girl. turn that useless ar pistol into a short barreled fighting rifle without any bullshit tax stamps or wait times. I'm telling you man shockwave blade is a must have
Good looking pistol. I am almost done with my ar pistol build. I went 10.5 inch barrel as well. I just need sights and an optic and sling to finish it.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Nice build man. You did great!
Did you ever say the brand name or did I just miss it?
I have an Anderson stripped lower just bought a complete upper now need to finish. what do u suggest I buy for the lower build kit I'm a newbie and this is my first if u can point me in right direction to complete this is appreciate it. thanks
looks great man, i mean that
how much did the total build cost you.
Did you go with pistol or carbine size gas tube?
You should try using a single point along and pushing out against it along with the cheek weld and that helps stabilize your shot
What company did you get the upper from? I'm looking at the Radical Firearms 10.5" upper for my setup. Yours looks nice though.
have you had any overgassing on you gpz upper?
have you had any problems at all with your flashlight being up beside of your flash hider? has the heat/percussion caused any light problems?
I shoot a 223 wyld on my 3 gun ar and have had it out to 700yrds. IMO its the best chamber style for what i do. So u made a great choice…. nice gun.
nice!! great vid. I want to get started on mine asap before Killary fucks it all up!!
That is a very nice looking gun you have built. Thanks for sharing.
I just built a 10.5" ar pistol and I'm not sure how far up to mount my surefire g2x. I was afraid the gases coming out of the flash hider would damage the light. Have you had an issue with that?
Try the MOE-K or the MOE-K SL grip. Same angle, less girth for better reach. K has no beaver tail, k sl does have a beaver tail. I use the Moe k sl on all of mine.
it's my pistol, so i'll do whatever the hell i want, piss off <-
epic one-liner and a Thumbs Up :)I saw most of your video. I didnt see mention of the optic. Is it a laser, or a red dot scope? Im building a pistol right now, and I am hoping to put on a laser myself, and ws wondering what you thought of the laser….if that is what you have on there. Thanks
Hot pistol is hot. Great vid and rad build dude. Making me stoked to start building my own.
If you take the forearm tan grip off you don't have to classify it as an SBR. It will be a legal build AR pistol. I talked to our local ATF agent and told him what I was building which is a 10.5 inch barrel ar with the pistol buffer tube and a Sig Sauer arm brace and he told me as long as I didn't shoulder it or place a fore grip on it to have fun with it as a legal pistol that no stamp was needed. It now has a 7 1/2 barrel on it to make it shorter and a little lighter.
Dude! Don't apologize!
beautiful Pre-sbr im running 11.5 pistol with shochwave blade and with my Ms2 sling it rest perfect on my cheek and akso transition very well but if i ever get to where i could i will sbr one but this one is staying the way it is again you have a very nice AR sir!
nice AR build…cool setup….I'm use to the regular grips also the K grip just doesn't feel right yet guess I'll try to get use to one….Shockwave Blade
nice thats a good price
what was the total cost for the upper and lower
DUDE you NEED to.get you a shockwave blade for that girl. turn that useless ar pistol into a short barreled fighting rifle without any bullshit tax stamps or wait times. I'm telling you man shockwave blade is a must have
Nice. I want to build one too.
Great Build!
What mount did you use? I just bought the lite and bout the HSP thorntail to mount it on a 14.5 carbine.
Your facebook link is broken.
Good looking pistol. I am almost done with my ar pistol build. I went 10.5 inch barrel as well. I just need sights and an optic and sling to finish it.