LR-308 Battle Rifle Build – JP & DPMS

Quanto que tá uma arma dessa

why would you ruin the look of that beautiful jp hand guard with that ugly ass top rail ?

Nice set up, what kind of buttstock?

I’d listen to a podcast of you.

Evergreen jackson washington jefferson i like to see cow shit and panther piss with no pulp juice

Looks like a good sniper riffle im crying couse i caint get one wyn

If you had the choice with you go witt the 5.56 are the 308

Nice, Tactical,I Like That.

It's "marksman", not "marksmanship". Bluntly, that's a bad build and terrible video. You got the wrong handguard, and 20 minutes to not show anything?

why is he on the floor?

That is sharp as hell…If the POF lower will work with a NON POF upper, is the reverse correct as well? I wish the AR10 stuff was more "standardized"….

Is that a 15 inch handguard?

very nice rifle. I like every bit of it. Great job czar61211.

That was a great video. Most guys just suck off their rifles but you actually gave pros and cons. I like that.

+czar61211 What size bullet do you use? I put that same gas block on my .308 and I can't get it to cycle at all

Adjustable gas block would save brass

what was the final price for the build ? Nice gun

Did you get the low profile Dpms? That's why it didn't match you hand guard.

I am a busy persons don't have time to waiste 20 or more minutes on reviewing. Get to the point and leave it up to 7-8 minutes.

Total build cost on this baby ? 🙂

Any videos of you actually shooting this rifle?????

Do have any videos of shooting this rifle???

Would love to see the groups it puts on paper

Dented brass isn't an issue with reloading.

nice rifle fam

what spring and buffer combo you are using on that stock.

Put on some canted iron sights on there in case your scope fails. Otherwise it is not a battle rifle it is a range rifle. Also quit being a dumbass about your tool doors in your stock. Put them back on you you can put tools such as a wrench for an adjustable gas block or a dirt brush. That or quit being a CoD fag and calling it a battle rifle

Nice looking rifle, too bad about the mismatched DPMS lo-profile upper and hi-profile handguard. Just another compatibility issue to have to watch out for in a .308 in a build.

one more thing i forgot to mention months ago.  The integrated trigger guard is a disaster waiting to happen, what if lets say the rifle drops on an angle where the full weight of it hits the trigger guard and it snaps or bends or breaks?  having a trigger guard that's detachable is better for those reasons if so it did break you can go ahead and use the original flat trigger guard until you can order a new one.  Integrated has fewer lines which makes a gun look dull…

The only 2 things I see I would change. Is the scope mount. You want a very solid grip on it. That one ,looks like it will give you trouble. Not enough foot print. The other thing is ,put off set iron pop up sights. Scope is nice but iron is a must.
   I just got done building a AR10. Mostly out of Palmetto armory 

semper fi       steve

foreals you messed up on that barrel son, you should have used a stainless, and that muzzle break, too much noise, all black, you needed carbon fiber hand rails, need teflon upper reciever, you dont need a nickle baron bolt carrior group, get one thats just has a capenter bolt, for reliability, your optics suck, you need one of those 2 k nikon sights, you put on garbage sights and claim to be a competition shooter.  I know im just hating on your nicely built ar 10, its really nice btw.  build ar 10 build it right, my friend has one all troyed out, may he spent 3k and i think its just average price on it too.  YOU PLAN TO RELOAD YOU OWN AMMO BUT DONT HAVE FORWARD ASSIST? ARE YOU INSANE please please… what if you put in the wrong mixture of propellant and the carrier doesnt go back all the way leaving a  catagory fail type malfuntion.  Failing being a dumbass bitch please, and yups i was just kidding

you want precision but you don't have a 400 series stainless steal barrel, heavy to be exact.

ar 10s are not as reliable as the ar 15s, if you want to shoot 308, buy a FAL, tweak it a bit, or a M1A, now those are crazy rifles, or a Dragonov SVD 762 54

rubber grip sucks

dude where are the Back up sights and bipod?!?

Is that a bull barrel

looking to do my first build is there any compatibility issues between lowers and uppers and other components that i should be aware of i am trying to build a 308 this style

great vid. Just built my own and having some short stroking issues. All premium components, so very frustrated. Shoots like a dream for about 30-40 rounds then the issue starts to happen. Also, very very important to plug up that FA. A buddy of mine used the FA and dented my JP BCG. 

To cool awesome job

Looks like a great rifle.

Thanks for the video.  I'm currently building and LR-308 with similar components.  Namely the LMOS BCG, adjustable gas block, and JP Silent Captured Spring.  Q1: how many rounds have you fired? Do you feel like it's "broken in"? Q2: can you approximate how much of the gas you have tuned from WOT? Q3: did you experience any tuning challenges or cycling issues since initial setup? Q4: which spring in the SCS system are you using?  Q5: do you feel the extra expense was justified?  Thanks.

CZAR61211., I won;t to reload the exact same calibers.

Will the acessories that fit the ar15 like forearms fit on the 308 platform

did you have to so any modifications to install that magpul Stock?? or is it straight drop in?

Your rifle gives me a boner

I love this rifle, definitely the best one I've seen, I wanted to build an economy version similar to this in 223. Could you give me an estimate without optics?

I didn't notice you talk about the foward assist plug, is it in there with a roll pin? How has the plug held up thus far? Im in the middle of my own 308 build.

Great review. I bought a Hogan .308 lower that I want to build out. I might take some of ur specs.
Any other advice. That barrel looks badass . What can I expect to pay for it

Ammo is damn high to own that gun..Sorry