BCM vs PSA Sabre Build Quality

These same guys d ride Daniel defense

No f**** clue.

All the low tier loot drops sucking PSA off in these comments

This definitely reminds me of when Payless opened a store and marketed their shoes as high end. Or when Folgers did their commercial tricking everyone into drinking it and liking it.

😂😂😂😂😂😂😂😂😂

Which is the full 16" and which is the pin and weld?

Best track record of QC vs worst track record of QC… For close to the same price.

Similar in quality lmao u sir are incorrect

I have both and the build quality between the two is negligible

So much military larping on YouTube

Elliot Dep recording yet another basic, soulless, boring video.

Man 1: Yeah this gun is a little better than that one.
Man 2: yup
Man 1: yup

That’s literally this whole video…
Who allowed you to make this bad of content?

LMAO these guys

I think it all depends on what you are planning on doing with it. Why buy a Lamborghini to just run around town? And you don't buy a Nissan Leaf to go track racing. You get what you can afford and what fits your needs.

lol

These guys do not know you’re not required to wear cotton to be a tampon.

For 200 dollars more 1200 gets you a mid length colt with a 16 inch barrel is the Psa sabor worth the price the sig m400 is actually cheaper at 900 dollars

BCM is my favorite individual gun company so I'm always a bit biased in their favor, but I also really want that Sabre 13.7 pin and weld upper. The quad rail and ASR muzzle device. Some people seem to forget we can enjoy more than 1 company. Enjoy the freedom.

BCM is soooo much higher quality

not a PSA hater but saying theyre pretty much the same as BCM is actual captain insano shit

Id say the BCM is a little "HIGHER" in price

They dont compare at all, ive experienced nothing but issues with the psa jakl builds, wayy too gassy, have to have the gas all the way turned up to get it to function correctly with a suppressor, bad heat treating on hard parts, just a mess. They might look good for first 2k rounds, then they just fall apart

Owning 1 bcm and 3 psa rifles (both great companies) gotta say there is no doubt a very clear difference in quality fit and function between them. My bcm seems to be slight more accurate and MUCH more reliable with about 2k rounds and 0 problems, on the other hand every psa I own has had multiple malfunctions with say the first sub 1k rounds… not a bad entry into the hobby but would never trust them as a serious duty rifle in my personal opinion. Quality just ain’t there

The metal is made in the same forge. Do your homework

Ok, now cover material, heat treat and finishes. Is there BCG hard chromed? Are the parts made from the same thing?

Doesn't matter the gun, someone, somewhere will hate it for one reason or another, Buy what you want and run it, if it's reliable keep it and ignore what random people on the internet say. I've had a g2c that ran flawless with well over 5000 rounds through it, never once failed me, I own multiple PSA firearms and not so much as a hickup from any of them. Just make sure the gun you are gonna bet your life on will be dependable by shooting 500 rounds through it, if it makes it without an issue it's g2g

" full 16 inch rifle " . Bud ,that's a carbine. A full rifle is 20 inches . In military context it's the M16 family vs car-15 and m4/m4a1. 16 and 14.5 inch barreled carbines. The colt xm177, colt commando and mk18 are the next size down at 11.5(15 with the 177 moderator ) 10.5 and 10.3 inch carbines.

😅

Elliott, guys, build quality aside, how do they compare in performance?

This has to be a joke

This not a comment to rant or trash anyone, just trying to help people understand the companies, their use cases and their mottos better.

The BCM fangirls are getting worse than Kpop. It was never BCM vs PSA and you guys need to understand that. Honestly guys, we get it BCM is better, most of us agree with it too. You all have to realize that PSA is not a bad company, they almost never take back parts due to bad manufacturing or defects, their service is top tier and lifetime warranty that extends beyond the original buyer. They are arming civilians at much cheaper prices, $500 for an AR that is damn close to a $1000 one. Even arguably same or better than some of the SA Saint Victor, Colts, M&P. The Sabre line is $850, same as a BCM and for that price even if both are identical BCM’s QC takes the cake. BCM also has the better BCG compared to the FOF that PSA offers. Both barrels are too similar to compare, both CHF with good steel. Sabre comes with a Radian CH, which is an $80 value over BCM that provides no CH. PSA also comes with good choices for Muzzle attachments for QD suppressor mounts, etc for the same price. BCM makes up that value with a leagues better BCG and Fit and Finish.

PSA might have had a rough few years in the past but their products, warranty and service now are top tier.

While PSA isn’t in the QC or trust worthy range of BCM yet, they just started their adventure and will just get better as time goes on if they follow this motto.

Both are great companies, BCM doesn’t sell stuff to law enforcement or military that civilians can’t own and pull out of those contracts, PSA aims to arm as many civilians as possible with quality for value. End of the day when SHTF, I would rather have 3 people in my group with sub $500 PSA’s than one with a $1500 BCM. Or 6 people with PSA’s then 1 with $3000 KAC. Fire density allows for better movement and suppression, accuracy ends the fight. You’re not sacrificing much accuracy with the budget option if you spent that left over money for ammo and training. Get a Gucci gun when you get better with it to justify the weapon limitations and not yours that are holding back the rifle. Most people can’t even touch that phase.

TLDR: for that price range (Sabre vs BCM line), go for BCM upper. Any lower, PSA takes the cake over most rifles in the $1000 range for $500. I would rather have an AR and not need it than need it and not have it because I couldn’t afford it.

All you showed was the bcm 🤦‍♂️

If the material is good
The machining is square
The fit is tight

The brand dont matter

If PSA would catch hate for anything is some wear parts like the buffer catch pin is brittle, the buffer spring gets memory, etc… all those parts and components are cheap as hell, even for good ones, so just replace them as needed they are ultimately a wear part and need service and replacement anyway and on the PSA you might need to do it sooner…

PSA barrels aint winning any accuracy awards, but again, match quality barrels are not super expensive these days… if you're in the Chrome lined or die field, then you have a much higher ammo waste into the berm budget then i

I’m not saying PSA is the absolute worst shit in the world but trying to say it’s comparable to a BCM is probably the wildest take I’ve heard in awhile

I call BS!!!!!!!!!!!!!!!!!!

Love seeing psa hate, you spent 5k to do what I do with 1,600$

The hell is the point of this video?!

BCM is just a very well made plain jane AR. The only thing really unique is the mk2 upper if you go that route.

BCM upper PSA Saber lower.

There is no way a psa is even close to a BCM in build quality…lol

Parts matter

Buy BCM, not poormetto.

A little higher quality? You’re kidding right lol

So PSA lower BCM upper? The new Reddit special?

The bcm will outlast the Sabre every time. However 900-1,000 dollars for a rifle with premium parts is nice too. I just think if anything the bcg in the Psa rifle will fail at 5k round. I’ll found out because I own both lol

Not much info on this short