
AlgoLaser Laser Engraver DIY KIT MK2 10000mW, Laser Cutter with 3.5″ Touch Screen and AlgoOS, High Precision Laser Engraving Machine for Wood and Metal Acrylic Glass Leather, Laser Class 1
LINK:
Coupon: DIYKITMK2 (5% off )
CHAPTERS
00:00 Intro
00:52 Unboxing
02:57 Read Over ALL Instructions Carefully
03:10 Step 1 – Assemble the Frame
03:39 Helpful Tip on Step 1
04:48 Connecting B & C Frame
05:48 Connecting B & F Frame
06:51 Step 2 – Assemble X-Axis
07:21 Step 3 – Assemble the Frame
07:44 Connecting A & C Frame
08:16 Connecting A & D Frame
08:59 Step 4 – Assemble the Belt
09:22 Belt on D Frame
10:34 Belt on C Frame
11:27 Securing Belt with Washer & Screw
13:24 Check Belt Tension
13:39 Step 5 – Assemble Limit Switch
15:12 Step 6 – Assemble Laser Module
15:56 Step 7 – Air Pump Hose Connection
16:15 Step 8 – Connect Air Pump to Hose
17:27 Step 9 – Assemble Control Box (Screen)
18:45 Step 10 – Assemble Main Cable
20:11 Step 11 – Secure Main Cable
22:36 Step 12 – Connect Power Cable
22:55 Safety Features
23:26 Step 13 – App & Wifi Connection
23:56 Step 14- Honeycomb Platform
24:15 Step 15 – Adjusting Height of Laser
25:56 Test 1 – Engrave & Cut on Wood
27:48 Test 2 – Logo Engraving on Wood
29:20 Test 3 – Cardboard Engraving with Preloaded Image
31:01 Test 4 – Metal Engraving with Preload Image
33:14 Test 5 – Engrave QR Code from App on Wood
35:49 Final Thoughts
About the Algolaser DIY Kit MK2 10W Laser:
[Super Easy to Use】AlgoLaser DIY KIT MK2 10W laser cutter and engraver machine. It features a built-in 3.5″ IPS touchscreen with AlgoOS, which offers intuitive touch-to-engrave functionality. No computer required, all engraving settings finished in one display. The AlgoOS system enables fault reporting, helping you to easily find the problem and solve it in time.
【Powerful 10W Laser Module】 AlgoLaser laser engraver using advanced spatial coherence technology, the spot size is only 0.05*0.1mm. Smaller spots can achieve higher engraving accuracy. The laser engraving machine engraving rate reaches 12,000mm/min. Whether it’s intricate designs or large-scale projects, the cutting-edge laser technology will help you do more in less time with precision and effciency.
【Interruption Recovery and Repeat Engraving】The DIY KIT MK2 lazer engraver supports resumption of engraving from the previous stopping point in the event of an unplanned interruption of engraving work. The laser cutter also supports repeated production of the same file without resetting the engraving parameters. Helps you save time on repeated parameter settings and improve work efficiency.
【Safe & User-friendly Design】This laser engraving machine equipped with 7 major safety features to ensuring your safety engraving experience. The AlgoOS system has preset engraving parameters for a variety of materials.
【Explore More Fun】The laser cutter and engraver machine can engrave on various materials such as paper, bamboo, wood, leather, PCB boards, aluminum oxide, metal, glass, etc.
【Wide Compatibility】In addition to the built-in AlgoOS control screen, the laser engraving machine is also compatible with AlgoLaser APP, LaserGRBL and LightBurn. This laser engraver supports 2.4G wifi and USB-C links and engraving file format supports jpg, svg, png, bmp, G code, dwg, etc. It’s a good choice for beginner of laser engraver machine.
Check out my website at
#algolaser #laserengraver #review #mcfixit #unboxing
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
——
Supplies used to record this video:
* GoPro Hero 7 Black –
* 256GB Flash Drive –
* Vlogging Frame –
* GoPro Pro 3.5mm Mic Adapter –
* Youmic Lavalier Lapel Mic –
* Boom Stand (tripod) –
* 5/8” to 1/4” adapter (boom to blogging frame-
* Portable Battery Powerbank-
* 6ft USB to USB-C (powerbank to GoPro)-

AlgoLaser Laser Engraver DIY KIT MK2 10000mW, Laser Cutter with 3.5" Touch Screen and AlgoOS, High Precision Laser Engraving Machine for Wood and Metal Acrylic Glass Leather, Laser Class 1
LINK: https://algolaser.com/?ref=MCFIXIT
Coupon: DIYKITMK2 (5% off )
CHAPTERS
00:00 Intro
00:52 Unboxing
02:57 Read Over ALL Instructions Carefully
03:10 Step 1 – Assemble the Frame
03:39 Helpful Tip on Step 1
4:48 Connecting B & C Frame
05:48 Connecting B & F Frame
06:51 Step 2 – Assemble X-Axis
07:21 Step 3 – Assemble the Frame
07:44 Connecting A & C Frame
08:16 Connecting A & D Frame
08:59 Step 4 – Assemble the Belt
09:22 Belt on D Frame
10:34 Belt on C Frame
11:27 Securing Belt with Washer & Screw
13:24 Check Belt Tension
13:39 Step 5 – Assemble Limit Switch
15:12 Step 6 – Assemble Laser Module
15:56 Step 7 – Air Pump Hose Connection
16:15 Step 8 – Connect Air Pump to Hose
17:27 Step 9 – Assemble Control Box (Screen)
18:45 Step 10 – Assemble Main Cable
20:11 Step 11 – Secure Main Cable
22:36 Step 12 – Connect Power Cable
22:55 Safety Features
23:26 Step 13 – App & Wifi Connection
23:56 Step 14- Honeycomb Platform
24:15 Step 15 – Adjusting Height of Laser
25:56 Test 1 – Engrave & Cut on Wood
27:48 Test 2 – Logo Engraving on Wood
29:20 Test 3 – Cardboard Engraving with Preloaded Image
31:01 Test 4 – Metal Engraving with Preload Image
33:14 Test 5 – Engrave QR Code from App on Wood
35:49 Final Thoughts
About this item
[Super Easy to Use】AlgoLaser DIY KIT MK2 10W laser cutter and engraver machine. It features a built-in 3.5" IPS touchscreen with AlgoOS, which offers intuitive touch-to-engrave functionality. No computer required, all engraving settings finished in one display. The AlgoOS system enables fault reporting, helping you to easily find the problem and solve it in time.
【Powerful 10W Laser Module】 AlgoLaser laser engraver using advanced spatial coherence technology, the spot size is only 0.05*0.1mm. Smaller spots can achieve higher engraving accuracy. The laser engraving machine engraving rate reaches 12,000mm/min. Whether it's intricate designs or large-scale projects, the cutting-edge laser technology will help you do more in less time with precision and effciency.
【Interruption Recovery and Repeat Engraving】The DIY KIT MK2 lazer engraver supports resumption of engraving from the previous stopping point in the event of an unplanned interruption of engraving work. The laser cutter also supports repeated production of the same file without resetting the engraving parameters. Helps you save time on repeated parameter settings and improve work efficiency.
【Safe & User-friendly Design】This laser engraving machine equipped with 7 major safety features to ensuring your safety engraving experience. The AlgoOS system has preset engraving parameters for a variety of materials.
【Explore More Fun】The laser cutter and engraver machine can engrave on various materials such as paper, bamboo, wood, leather, PCB boards, aluminum oxide, metal, glass, etc.
【Wide Compatibility】In addition to the built-in AlgoOS control screen, the laser engraving machine is also compatible with AlgoLaser APP, LaserGRBL and LightBurn. This laser engraver supports 2.4G wifi and USB-C links and engraving file format supports jpg, svg, png, bmp, G code, dwg, etc. It's a good choice for beginner of laser engraver machine.
Check out my website at http://mcfixit.us
#algolaser #laserengraver #review #mcfixit #unboxing
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
——
Supplies used to record this video:
GoPro Hero 7 Black – https://amzn.to/3f3ALtb
256GB Flash Drive – https://amzn.to/33pAueG
Vlogging Frame – https://amzn.to/33tajE0
GoPro Pro 3.5mm Mic Adapter – https://amzn.to/2RCURCu
Youmic Lavalier Lapel Mic – https://amzn.to/2R55sWX
Boom Stand (tripod) – https://amzn.to/3bdkQaw
5/8” to 1/4” adapter (boom to blogging frame- https://amzn.to/3txrVsM
Portable Battery Powerbank- https://amzn.to/3vJQc0q
6ft USB to USB-C (powerbank to GoPro)- https://amzn.to/3uAS5MH
Fantastic video! Thanks for showing how to put i together!
Does the software on the control box use 2.4g wifi or 5g wifi? My router only does 2.4g and I want to make sure it works remotely before purchasing.
How many watts is this machine?
Does it engrave on leather?
How easy is this laser to operate?