ITP Adapter with WE drum
The drum has a pressure relief valve. It blows off at 160 PSI. I sealed it with 2K glue because I don’t have too much pressure with HPA. In the summer with normal gas it can be useful.
00:08 ITP Adapter
00:22 Feeding ramp
00:34 WE Drum (Glock)
01:12 UNSCREW THE GLOCK ADAPTER
02:37 take parts from VFC AR15 magazine
04:23 REMOVE THE PARTS IN THE ADAPTER AND UNSCREW THEM
05:18 DON’T MAKE MY MISTAKE
05:35 NOW THE ADAPTER CAN BE SCREWED TOGETHER
07:36 Then disassemble further the Drum
09:58 INSTALL NEW FEEDING RAMP
11:05 PUT EVERYTHING BACK TOGETHER AS BEFORE
12:15 SCREW THE ADAPTER ONTO THE DRUM, IMPORTANT DO NOT FORGET THE SEAL
12:57 test with propane
13:25 Change to HPA
13:58 test with HPA
