Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
Easy there broke back mountain. The rest of us are trying to buy eggs and bread and put gas in our 10 year old car to get to our second job. If I had money for that thing and all the Sargent Tackleberry crap you’re hauling around I might be able to take a weeks vacation.
I have an $800 Radical Arms AR as my cheapest and I load them full and never once had any issues.. honestly didn’t even know it was a problem until people started posting about it just recently
My unit had the cheap military issue mags. They were really bad. With 3 rounds they wouldn’t lock in place with a closed bolt. We somehow pulled funds to buy good magazines prior to deployment.
All that being said, we are sending people to war. Our soldiers deserve to have quality gear that works. Get rid of the cheap shit and get some gear that is worth a damn.
You just simply give it a tap and make sure it clicks even tho you feel tension you simply just push it in more and works perfectly on return because of bolt being held back etc when reloading your next 30 round mag goes in perfectly
My 800$ ruger ar556 has no issues either loading a full mag on closed bolt. Sometimes i thing these “instructors” just make shit up to get people to waste money on expensive rifles.
I USE A LWRC Rifle and Pmags. Never had any issue with 30 rounds loaded. That is my 5.56 rifle. My LWRC in 6.8 Rem RUNS and LOADS FLAWLESLY using BARRETT 30 ROUNDERS. Mine is not the Pmag only 6.8. CAN'T GO WRONG WITH A LWRC PISTON RIFLE!!!!
No way you have 30 rounds in that Pmag with that much give pushing the top round down, unless you have a altered spring in there. A stock Pmag has maybe 1/16 inch give if not less with 30 rounds in it. I've measured all 25 of my Pmags.
Shit iv got an m&p15 thats as cheep as dirt… but it has no issues feeding, loading full mags on a closed bolt or shooting accuracy. Nada. It just works. On ocation I do find a usgi mag that won't just fall out empty but its got less that 1000 rounds so it so 🤷
combat infantry veteran of 10 years we always load 28 it saves the mag lips and when you have to depend on what you brought to the party you take care of it and it has always taken care of me.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Never had that prob on my DD, LWRC or knights
Quality doesn't mean expensive. My aero precision build only costed me 800 and does this very comfortably. Just gotta find the right manufacturer.
Palmetto never gave me problems ever why spend 3k on a gun when you can upgrade one to be EVEN BETTER FOR LESS
I was a infantryman and always did 29 bc as your weapon gets f very hot if you have 30 it can cause issues .
Never had that problem. An I Built mine
Should've joined the military now you will spend forever playing pretend
man looking like hes out here edging to catch a legal body
Easy there broke back mountain. The rest of us are trying to buy eggs and bread and put gas in our 10 year old car to get to our second job. If I had money for that thing and all the Sargent Tackleberry crap you’re hauling around I might be able to take a weeks vacation.
This is dumb af. Just tap to make sure its home. Clout chasers.
I have an $800 Radical Arms AR as my cheapest and I load them full and never once had any issues.. honestly didn’t even know it was a problem until people started posting about it just recently
My psa doesn't have that issue lmao
Don't have that problem with my windham weaponry AR
Can you get that hat at the same Walmart where you buy your guns?
My unit had the cheap military issue mags. They were really bad. With 3 rounds they wouldn’t lock in place with a closed bolt. We somehow pulled funds to buy good magazines prior to deployment.
All that being said, we are sending people to war. Our soldiers deserve to have quality gear that works. Get rid of the cheap shit and get some gear that is worth a damn.
You've clearly never used a 30 year old GI mag then
You just simply give it a tap and make sure it clicks even tho you feel tension you simply just push it in more and works perfectly on return because of bolt being held back etc when reloading your next 30 round mag goes in perfectly
My 800$ ruger ar556 has no issues either loading a full mag on closed bolt. Sometimes i thing these “instructors” just make shit up to get people to waste money on expensive rifles.
😂
It's not the rifle. It's the magazine. Everyone knows a magpul mag takes 31 rounds. So loading a 30 is the way God intended
It is way more likely to be the mag than the rifle
The higher those optics get , the less I care to listen to these people talk
Lol I have a bushmaster xm15 m4a2 ( 2008) and always load 30 with pmags
It's because of our mags in the Marines in '05 when I was in are standard.
Most people just load til it's full and sometimes you end up with an extra round stuffed in the mag. It's actually pretty bad for the magazine.
I USE A LWRC Rifle and Pmags. Never had any issue with 30 rounds loaded. That is my 5.56 rifle.
My LWRC in 6.8 Rem RUNS and LOADS FLAWLESLY using BARRETT 30 ROUNDERS. Mine is not the Pmag only 6.8.
CAN'T GO WRONG WITH A LWRC PISTON RIFLE!!!!
No way you have 30 rounds in that Pmag with that much give pushing the top round down, unless you have a altered spring in there. A stock Pmag has maybe 1/16 inch give if not less with 30 rounds in it. I've measured all 25 of my Pmags.
I've Never had that issue on My Ruger MPR Either!
My ddmk18 can take a full mag on close bolt
Even me 3d printing loses it works with any round idk what people say at all full 30rd mag goes in clean asf
Ddm4v7 say no
Im a budget dude, and iv never had a rifle not chamber a round with a full mag. What boomer hoopty bullshit ars are you people buying
Not all rifles are created equal.
Way off subject…. But I love your hat Sir.!!! 💯 😁👍 And your precision tool.!!!
💪🇺🇲
Lol my PSA does fine
John from warrior poet is fuming rn
After the Army all AR platforms are quality to me. Lol. That being said, I've noticed poly mags take a bit longer to break in than metal.
Shit iv got an m&p15 thats as cheep as dirt… but it has no issues feeding, loading full mags on a closed bolt or shooting accuracy.
Nada. It just works.
On ocation I do find a usgi mag that won't just fall out empty but its got less that 1000 rounds so it so 🤷
I fill my magazines with 30 rounds and never have a problem, so I guess my ruger AR-15 is high quality 😂😂😁😁🙏
My mcx don't like to seat 30rd pmags when filled to the brimmy brim
What kind of rifle are you using? I can't quite understand.
Don't have an issue with my DPMS
I’ll be open and honest. I’ve got a diamondback not the greatest rifle on the market and I have no issues doing a tac re load on closed bolt
Why type sling is this
Only idiots load under capacity.
Like just get a smith and wesson sport 2 takes every mag and runs every 5.56/.223 round
That’s too
Much crap on your riffle for me cowboy I can’t imagine how shxt one must be without sed crap on it
Must be me, but these hydra mounts still look hideous
combat infantry veteran of 10 years we always load 28 it saves the mag lips and when you have to depend on what you brought to the party you take care of it and it has always taken care of me.
Use an AK for a bit, it’s an operator problem trying to sissy it in
Meanwhile even the lowest quality AKMs that have never been taken care of or lubricated have no issues locking and running a full 30rd mag.