Programming a Streamlight

If you have a programmable (TEN-TAP) @streamlightinc like the ProTac HL that I have, there are three (3) different settings that you can use.
1). High/Strobe/Low (Default)
2). High Only
3). Low/High

To change the setting:
1). Start from the “OFF” position
2). Tap the cap lightly 9 times fast
3). Hold down on the 10th tap
4). Repeat until desired setting is achieved *Only tap the cap, do not click the cap causing it to be continuously on. Use the momentary on method to tap the cap*