To stake or not to stake? No, that isn’t the title of an episode of Buffy the Vampire Slayer! Instead, Brownells Gun Techs Steve and Caleb tackle a long-standing debate among AR-15 folks: Should you stake the castle nut to the endplate on the receiver extension tube? Some folks say you should always stake it, while others say, “Nah, never.” Caleb is in the “stake it, stake it good” camp – and he explains the practical experience that got him there. If an AR-15 is used a lot, the castle nut WILL work loose. So unless the gun is a wall-hanger or a range fun gun, you should go ahead and stake that castle nut to the endplate – especially on law enforcement, military, and competition AR-15s and M16s. However, if you’re like Steve and tinker a lot with your AR, swapping stocks and the like, there is an alternative to breaking the stake every time you remove the receiver extension (aka, “buffer tube”). The Primary Weapon Systems (PWS) Ratchet Lock Castle Nut & End Plate use a pin-and-detent system that keeps the castle nut tight, yet lets you easily remove it when you need to. So among serious AR-15 shooters, not staking is the Myth – and it’s busted!
Want more Smyth Busters? Check out our video library AND click Subscribe to be notified of new episodes!
Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
Hmm I never had a castle nut come loose I shoot mine often as well but I always carry a wrench with me
I wonder how many people had them come loose after using a proper torque wrench. The most common cause of fasteners coming loose in any machine is failure to properly torque them to begin with.
I had a new colt lower (factory) and it didn't come staked… say what you will about colt but it's a rare miss in my opinion. It came loose the first time I shot it and I noticed it while cleaning. Bought a PWS buffer and system and I've never had a problem since.
My friend just built an AR and he literally only hand tightened it I mean without a castle nut wrench we shot 80 rd and it didn’t loosen at all but yeah I still do agree with your outcome would be terrible to be a cop in a shoot out then all of a sudden your castle nut goes loose
I think I am going to buy that ratcheting castle nut. Pretty cool. It has a QD on it also. Little salty for a nut, but who doesn’t need a good nut?!
I do not stake mine either bc I am always switching stuff around and not using the weapons everyday. However, I have made it part of my cleaning process to make sure the castle nut is tight. I clean every time the gun is shot w no exceptions, so I am not too worried about the castle nut coming loose with my limited use of the weapons. For military and LEO's though, I would stake it.
Idc what the gun is used for ALWAYS STAKE IT
Picture, simple.
I like stake, I fry'em, grill'em every now and then when i'm in the mood for some stake.! It's the best.! 😁 🍖🍖🍖
Great content guys. For me it depends on the gun. If the build is finished & nothing is going to be changed I stake it. If there’s a chance I’ll be making changes I’ve found loctite & marking it with a paint pen works well. If I see it start to drift I’ll tune it back up & go.
I stake mine, except for my Maxim brace which doesn't allow you to stake it & I've had that one back out on me. Ive also got one PWS ratcheting system, have yet to try it out (haven't fired the gun that has it yet since I just built it).
How about VibraTite?
My thoughts are if you are using your rifle as a civilian for home defense and range use, not staking is completely adequate. I shoot my ars regularly and havent had an issue. We are not commandos we are patriots. But im not knocking it, as better safe than sorry.
I did weapons repair in the army on the M16A1 with just the old buffer tube. It was just torqued. As a machinist I lean towards blue loctite.
Only if you want it to stay in place.
No stake. I use a good amount of blue loctite stick
Great subject. Thanks fur touching on this
I have had a castle nut come loose. Considering I wasn't planning on changing things out, I decided to stake it.
With all of the ever changing CA compliant mods needed, loctite is as permanent as you can go in commiefornia.
Be stronger and you won’t need to stake things.
Only watched this cuz wondering "wtf is a castle nut?"..😂😂
Did not take long to figure it out and find that I've worked with castle nuts many times before thru the years.. English just being my third language and therefore not familiar with the english name of the part.. Oh well – every day you learn something new.😁
Stake and spot weld to be safe
How about inspecting your firearm before you begin your day? Tighten anything that needs it.
Make more posts about the federal reserve
Stake it !!!!!!!
Oh please how about checking that everything is tight first before handling on the range? No need to stake its a perfect way to trash a lock ring and buffer tube shoe goo on the treads or blue loctite is the way to go!
@brownells @smythbusters Your web site say's the PWS castle nut is "DISCONTINUED"!! 🙁
I heard steak and readied my spork
Stake it 100%
Stake
What about using Locktite? Would that be an option?
Staked or not, I just realized (after watching dozens in this video series) how big these sombitches ears are!
I stake because I’ll just buy another rifle if I want to change things up.
I just put 1 drop of loctite on the threads, hand tighten then put a flathead in one of the notches and give it a few good taps. Never had an issue
I like my stake medium, and cooked on the BGE
Blue Loctite has been plenty for me.
Stake it. Got it.
put blue (not red) locktite on every threads on your AR, you can thank me later!
+1000 on the locktite. You do not want your buffer tube coming loose, it could cause a misfire, and you definitely don't want that. I've build 100s of ARs and I put locktite on everyone of my customer's castle nut. Not one complaint yet!
I don’t stake the castle nut and I don’t stake the gas key screws either. Waste of time and pointless if you tighten it up right and use blue or red loctite it will not come loose. But everyone in the comments is using their AR-15 everyday in all aspects of their life’ so they need it staked or they will definitely die🙄🙄🙄
Why does the Federal Reserve have ARs? They are bankers…
They where loose but guess what ill bet they still work even loose i know mine does i have it loose because i dont have the takedown pin detents installed yet
Well, one has to understand threads and fasteners first. The threads stretch a little bit. And metal has memory, meaning it tries to go back where it was. This creates the clamping force. Now, that will stay in place under only so much force. A firearm going off transmits far more force than the torque needed to break the nut loose. So his comment about how much it is used is probably right.
Duct Tape…….nuff said