Everyone asks where I find gun stuff in stock or where I order from, so here you are:
I show you exactly how to take apart your AK bolt, clean it, and put it back together again! It is not that hard, so watch and I will show you exactly how to do it!
Products used in this video that I recommend:
Ballistol:
AK Cleaning Kit:
___________________________________________________
Follow me on Facebook:
The pins in my bolt won’t budge. I used lubricants, WD-40 and break free with no success. Any advice?
Is there any value to polishing the surfaces of the parts contacting other parts of the action? I noticed that at 9:38 the facing surface looks pretty rough! Great video! Thanks
thanks for this video it saved my ass i was cleaning my mak 90 and the firing pin fell out cause the pin somehow got loose
Great video and good accompanying instruction. I also tremendously appreciate the lack of annoying distracting noise, uh music.
Can anyone help me how to disassemble Galil ACE 7.62×39 bolt, please? Yes, it's "almost" similar to AK bolt but the firing pin is NOT the same because the Galil firing pin does not free falling. I believe it has spring inside. I will truly appreciate it if you can help me find a video on Galil ACE bolt disassembly. Thank you.
Need a cleaning video for AK V
is it the same disassembly procedure of Galil ACE 7.62×39 bolt? i could NOT find a video for Galil bolt disassembly.
I recently bought psak47 gf3 and I am having a problem with the bolt sticking when pulled all the way back. I noticed it is doing this because the bolt rises slightly and catches on the rails. Is this something that should work itself out or should I use a buffer or contact the manufacturer?
Yeah my pins aren't coming out nearly that easily. How do I get them unstuck?
Thank for you AK instructional videos. Because of them, I know my SGL31 thoroughly and can effectively clean all components. 100% agree with your methodology of knowing ones weapons inside and out.
Great job sir
Great videos….!
Carburetor cleaner works well for cleaning also. Brake cleaner great for drying.
What do you think about using a tumbler to clean the disassembled bolt and pin?
Thanks for this job
My retaining pin for the firing pin sorta… Just falls out… Is that bad?
Excellent no BS instructional videos.
Another must watch great video. Thanks a lot.
What if my bolt is stuck inside the carrier? Any ideas on how to get it out?
Is it an issue if your firing pin retaining pin is loose inside the bolt face itself. Mine will fall out if I turn the bolt face to certain angles.
Absolute great how to video! Ive been needing to do this but was unsure how to. Your closeup shots were VERY helpful…Thanks mucho!
Great instruction period, simple and informative….thanks
Spraying it down with brake cleaner works just as good
Well done. Thanks for your help!
Great video
Simple video on the bolt thanks
I followed you and cleaned my bolt for the first time in my life wow man it was really really dirty and very hard to move but after cleaning now its perfect and I learned from you to not oil the bolt inside!
I was putting too much oil!
Thank you alot for your video
Great video thumbs up👍😊
I drink Ballistol.