In Anderson Del-Ton AR15 for 600.00 I show how you can build an affordable AR15 for under 600 dollars. Anderson Del-Ton AR15 for 600.00 goes over what is needed to have your own AR15..Thanks to Midway for the great prices. Hre is a breakdown of the parts.
Del-Ton M4 Carbine Kit AR-15 5.56x45mm NATO 1 in 9″ Twist 16″ M4 Contour Barrel
Product #: 891766 Del-Ton #: RKT100 UPC #: 848456000003
$429.99
SaleSave $70.00 (14%)
Ships today from MidwayUSA
This Del-Ton M4 Carbine Kit includes everything needed to turn your Stripped AR-15 Lower Receiver into a complete, fully functional rifle. This kit features an assembled Del-Ton A3 Flat-Top Upper Receiver with a 16″ M4 Contour Barrel, Carbine-Length gas system, F-Marked Front Sight Assembly, 2-Piece CAR-Style Handguards and an A2 Flash Hider. The barrel’s 5.56x45mm NATO Chamber, M4 Feed Ramps and 1 in 9″ Twist rifling ensure reliable feeding and functioning with a wide variety of both commercial and surplus ammunition. The Bolt Carrier is machined from 8620 Steel for strength, incorporates a properly staked, chrome lined gas key, and houses a Carpenter 158 Steel Bolt that has been High Pressure Tested and Magnetic Particle Inspected to guarantee a consistent, defect-free part.
The kit includes a complete Lower Receiver Parts kit that is ready for installation into the host stripped lower. A M4-Style Collapsible Buttstock Assembly rounds out the package with a Mil-Spec diameter buffer tube, carbine buffer and buffer spring. Stripped lower receiver and magazines are NOT included. Upper receiver is fully assembled at the factory, lower parts kit and stock assembly will need to be installed by the end-user.
Upper Assembly Technical Information
• Upper Receiver: A3 Flat-Top
• Barrel Length: 16″
• Barrel Contour: M4
• Barrel Material: 4140 Chrome Moly Vanadium Steel
• Muzzle Thread Pattern: 1/2″-28
• Chrome Lined: No
• Barrel Finish: Manganese Phosphate (Parkerized)
• Twist Rate: 1 in 9″
• Chamber: 5.56x45mm NATO
• M4 Feed Ramps: Yes
• Muzzle Device: A2 Flash Hider
• Gas System Length: Carbine
• Gas Block Diameter: 0.750″
• Handguard: 2-Piece Polymer, CAR-Style w/Heatshield
• Sights: F-Marked Fixed Front, No Rear
Lower Parts Kit Includes
• Bolt Catch
• Bolt Catch Plunger
• Bolt Catch Roll Pin
• Bolt Catch Spring
• Buffer Retainer
• Buffer Retainer Spring
• Disconnector
• Disconnector Spring
• Hammer
• Hammer Pin
• Hammer Spring
• Magazine Catch
• Magazine Catch Button
• Magazine Catch Spring
• A2 Pistol Grip
• Pistol Grip Lock Washer
• Pistol Grip Screw
• Pivot Pin
• Pivot Pin Detent
• Pivot Pin Detent Spring
• Safety Selector
• Safety Selector Detent
• Safety Selector Detent Spring
• Takedown Pin
• Takedown Pin Detent
• Takedown Pin Detent Spring
• Trigger
• Trigger Guard
• Trigger Guard Roll Pin
• Trigger Pin
• Trigger Spring
Buttstock Assembly Technical Information
• Stock: M4-Style Collapsible, Polymer
• Receiver Extension: Mil-Spec Diameter
• Buffer: Carbine
• Buffer Spring: Carbine
• Receiver Extension Lock Ring (Castle Nut) Included
AR15 BUILD
PARTS COST
FROM MIDWAY
COMPLETE Del-Ton M4 Carbine Kit AR-15 $ 442.00
INCLUDING COMPLETE Upper Assembly
INCLUDING COMPLETE Lower Parts Kit
INCLUDING COMPLETE Buttstock Assembly
FROM EBAY CARRY HANDLE W SIGHT $ 22.00
FROM KING GUN CENTER
LOWER RECEIVER (80.00) & DROS $ 119.00
TOTAL PARTS $ 583.00
Follow on Twitter:
https//twitter.com/ steelpolynbrass
Email:
steelpolymernbrass@comcast.net
Royalty Free Music by Incompetech.com
“Hitman” by Kevin MacLeod (incompetech.com)
“The Decent” by Kevin MacLeod (incompetch.com)
“Satiate Percission” by Kevin MacLeod (incompetech.com)
“Undaunted” by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
Disclaimer: These videos are for entertainment purposes only, attempting anything done on these videos is solely AT YOUR OWN RISK. Remember SAFETY FIRST..
Note to readers: Please click the share buttons above or below. Forward this article to your email lists. Crosspost on your blog site, social media, internet forums. etc.
Thank you, sir!
I JUST BOUGHT MY DEL-TON 556 FOR $399 AND $8 SHIPPING. DIDN'T HAVE TO BUILD A THING.
I didn't know t at the time but I did the same thing last fall ,.. a Anderson lower for (I got mine for $35 because Fatboy Tact. had a sale to celebrate their newborn,..lol )and the (parts kit for $40) ,..the my build kit for 439.00 … Ya,.. Great gun for under 600..00 well under it ..
Midway had a m4 del-ton kit for 409.00 add a 80%lower still under 500.00 no mags no rear sight good deal.
AR stoner upper plus lower parts kit for 399$ midway USA Anderson lower with milled trigger guard for 50$ from rural King, AR-15 less than 500$ can't beat it ;D
Thank You for taking the time to go through the build. You answered questions and addressed concerns. Going to Gun Show tomorrow morning to see what deals are there being its Sunday. God Bless
Anderson (complete) AR lower approximately $150.
Del-ton AR upper approximately $400 (I am looking at the 20" barrel).
Together that is 550. Not a bad deal in my opinion.
built mine for 525
Fantastic budget build. I left a comment on your other vid so I'll keep this one short and just say great vid!!!
Great video, I just got a Spikes Tactical from Kings Gun Center in Hanford. Nice to see a local YouTuber. Keep the videos coming my friend.
i just built an anderson palmetto ar15 for about $400. Boom!
I loved your video sir. Thank you for taking the time to share your knowledge with us 😊
Dell-ton makes great rifles. Mine (Del- ton E316) has been excellent from day one. Good instructional video!
Definitely not bad price wise with what we have to deal with in this state.
Great video as always