AR 15 Handguard Upgrade 2018 // (COUPONS)

💥UPDATE!
———————-
More info on these Products, Builds, & Coupons Here💥https://goo.gl/eBJpy2

Is the flashlight ok right there after shooting several times? It seems like it might get roasted a little bit right there.

What brand is the hand stop?

This guys like the Casey Neistat of guns and I like it

Woah. Your editing method is making have a seizure

The end is cut out for the suppressor, and magpul has a low profile hand stop which works and looks tight if it was my rifle but your tool and your choice

Love the honest review. I think it may work better for the build Im about to do where I’m just using a bipod in the front. Does your aero precision hand guard have a rail section at the front? I couldn’t tell watching

Any plans on working with T5 custom kydex in the future? I just ordered one of their hitchhiker rigs for my 19x with a streamlight tlr1hl and an OWB holster for the same gun for my job. I would love to hear your opinion on it.

I'm an old Infantry guy, so my take is probably a bit different than yours. The problem I have with the small diameter handguards is heat. You better be wearing insulated gloves on your off hand, if you are doing a lot of firing. I also have a thing about lights on a weapon, they make you a target. IMO, better to have a laser that you can easily switch on or off in that position than a light. Just looking at your muzzle break/flash suppressor it looks like it will cut into your light in that position. In general, anything that puts my hand out to the end of the barrel gets a flash can to direct the blast forward. I keep hearing the SOF community talking about people getting a finger cut off by those birdcages on SBRs. JMHO.

Too wide for my liking. I prefer a super slim rail. 🤷🏽‍♂️

Yea $225 is really pushing it. The M-lock Keymod dynamic duo is pretty cool, I like that. But I'm a Keymod guy, all my rail accessories work with that, i really don't have a need to switch back and forth.

Hey dude, I want to say thank you for the discount codes. Super helpful!

The compensator might fuck up the light. You gotta remember each shot the gas's/ fire will be hitting it.

you sir need a grip stop.

Does anybody know how to set up notifications when a youtuber uploads? This is the only channel Im subscribed to on two accounts. Its the only channel I watch basically every video front to end.

I installed a 15" Stinger rail on my friends Ruger 556. Super easy install. Very cheap and made in the great State of Texas. Check them out.

It’s an mlok handguard, utilize mlok accessories and you will be happy. Choose a different weapon light system so the mount up is better. For example streamlight Protac rail mount, fairly inexpensive and has everything you need to mount and run it. The system also is the same size of a surefire mini scout so all mounting accessories the surefire works on the streamlight.

Payed less for my BCM handguard

Jonathan, cool rail or as I say handguard. Check out SLR rifle works handguards and if you decide to get one or you want one let me know. You can also get small pieces of picatinny rail that will bolt to those M Lok sections and let you put your light anywhere there's an M Lok mount. Unfortunately with that integrated pic rail on the very front you won't be able to put it there. Another words you can't but the picatinny rail up to the integrated picatinny rail because it's solo on the handguard. Cool review I like to see new product. If I'm going to spend money like that I'm going to buy something exactly what I need. The SLR rifle Works handguards are awesome I'm a dealer for them. They also have the ability to put the barrel nut gas block and gas tube on with no timing of the barrel nut and then slide the handguard on over the barrel nut. I think they'll have something that you'll like checked out the sololite handguard m-lok if that's what you want or if you want key mod they have that as well they have multiple links they even sell hand stops that bolt to the m lock or key mod. They also sell pieces of picatinny rail that you can put anywhere you want to the keymod or mlok and attach things wherever you need to. Hit me back if you're interested.

Price is over priced and I agree on the rails. The attachment around the barrel but is great.

Probably has been pointed out already but do they make a picatinny attachment allowing you to move your handstop back…or another handstop using the other attachment capabilities?
I sometimes believe the manufacturing companies actually know that creating something new forces ppl to buy new stuff…thus increasing their bottom line.

Just add a small section of M-Lok / Picatinny Rail to mount your forward grip

Thanks for your honest review. You can buy a decent complete upper for that price:)

it's a good rail, there will never be a rail that fits everyone's needs.

Review on cloud defensive LCS?

Great point on all aspects. That price is a bit seep for what you are getting. There are other options for hand guards that are well known a proven for much less. You really don't want to be running that light too far forward. The blast from the barrel will start discoloring the lens on it and effect your light output due to carbon buildup and all that fun stuff. I have a rail similar to that by another company that pretty much has the same setup at the front. The only thing I use it for is a bi-pod. To be honest m-lock or key-mod on the sides would be better for versatility, in my opinion.

I would take the Aero because of price vs what it is. But I have to say, I love the look of hand guards that are slanted in the front. Flat shrouds are the only thing I don't like about most ARs.

Tactical Toolbox you're brutally honest regardless of the fact that the product you review was a freebie and I can truly appreciate that. I think your opinion of the pic rail section is dead on and for the price it should have no complaints. Great companies listen to customer feedback. Thanks for your honesty.

Honesty is always the right way to go! Great video and great points of possible problems that other people are bound to run into. Keep up the awesome reviews!

Nice revjew and upgrade brother..if your interested in selling that original hand guard name your price and let me know…

Totally agree with you on the cons. I see the point of having the rail raised up higher. Price is steep for something you can’t make your own setup work

That price is ridiculous.

Oops correction on that hand guard is a STNGR. Damn auto correct phones.

Having hand guard issues myself trying to fit a aac 45 can to my 9mm ar 5 inch barrel. Tired of the old quad rail……Good video

Put a m lock picitiney rail on it and use that free mother. Looks good. Too high on the cost though. Try a Stryker hand rail out of Texas I believe. Priced around 100 bucks and good quality. Check em out.

Take a look at using a Strike Industries SI Link AFG. I know you have used one in the past.

Dave here from F4. Thanks for the review and certainly appreciated the honest assessment. I just wanted to point out that you omitted our regular ARS rail that has our hybrid system the entire length of the rail, not just the forward 5”. The Lite is just a variant of the standard ARS rail. That’s an important aspect of our patented system as a whole. Thanks again

Prefer the F4, but they need to extend the pic rail length. IMO, the rail has a better lockup than the Aero. Regardless, I’d go with Geissele for that money, but I am a SCAR, LMT, LWRC guy. I don’t get to choose a rail with those platforms. Weird that the machining marks made the texture rough. Need to improve on the QC for the stuff shipping to customers.

And, most importantly, it looks cool too. That's how ya stay sexy! Does it have any anti-rotation properties?

Just stumbled across this video.. your teeth plus facial features look like a shark… you have one of those faces that I want to punch. Thanks

That rail light looks sick too